Conversion plug basically see the choose and buy copper piec
发布日期：2013-12-05 16:12:01 点击量：1656 信息来源：Creation
The current mainstream socket tin phosphor bronze is used as the copper material.Appearance of tin phosphor bronze alloy is purple, the biggest characteristic is its fatigue strength is very high, strong elasticity, good corrosion resistance, oxidation resistance.
1, copper thickness, improve current capacity, reduce the resistance of the copper pieces of their own;
2, strong toughness, especially applied to the socket pin part, not easy to deformation.Even if the long-term use of socket, can maintain a proper clamping force, to ensure that the set of closely connected with the plug, reducing arc;
3, anti-oxidation, not rusting, reduce caused by corrosion resistance increase and the hot issues;
4, less riveting, had better be a whole copper pieces, further reducing fracture and rivet riveting part of fever.
In the past a few years ago, made from brass socket current-carrying parts is the mainstream;And now, still do the current-carrying was sink with brass parts, quality time for sure.Brass appearance is bright yellow, good conductive ability, quality of a material soft, wear-resisting, but antioxidant, toughness (elastic) performance is not ideal.Brass after using for a long time, will be oxidation corrosion on the surface of the copper, a dark, increased contact resistance;After repeated pull plug, brass plates due to poor toughness and deformation is serious, often appear unable to take electricity phenomenon, or because of poor contact arc formation, to ensure safety.
The current mainstream socket tin phosphor bronze is used as the copper material.Appearance of tin phosphor bronze alloy is purple, the biggest characteristic is its fatigue strength is very high, strong elasticity, good corrosion resistance, oxidation resistance.Even after using for a long time, the surface will not be oxidation and corrosion, plug will not deformation, kept the appropriate clamping force.
Measure thickness of copper pieces, such as visual, not disassemble the product can use simple hand weights.Dosage of copper pieces of the foot, the heavier weight is socket.
Socket products of old brand, basically be made current-carrying tin phosphor bronze pieces, so as to guarantee the socket over 12 years of normal life.Like China production of light conversion plug, the use of copper is the integration of the socket, use of continuous process, selection of high quality tin phosphor copper and high precision forming in one time and avoid too much riveting points, reduces the resistance of the material itself, to reduce the fever of riveting part fracture and rivet, fundamentally eliminate the riveting point affect the quality of future trouble, significantly enhance the security performance of the socket.China light chooses tin phosphor bronze material, not only has the good conductivity of copper, and has good elasticity, fatigue resistance, corrosion resistance, oxidation resistance is superior.In order to make the set of more perfect performance, China light conversion plug copper thickness in 0.6 millimeter above all, ensure that various series socket clamping force is stronger, more smoothly, pull pull plug can still normal use after more than 15000 times, far higher than the national standard of 5000 times.
